Drinking water generally carries lead from plumbing that has been connected with lead solder (outlawed in 1986) or from outdated water distribution lines. There are a number of things you can do to reduce the risk of lead in your drinking water. Some sources suggest running your tap water for a couple of minutes before filling a glass to flush any accumulated lead from the water line (lead dissolves into standing water over time). However, this is not a foolproof solution, as there is no way of knowing whether all of the lead has been removed and since lead can still dissolve into running water. Never use hot tap water to prepare drinks or meals as hot water attracts more lead than cold water does. If you need hot water, heat cold tap water on the stove or in a microwave. In their informational brochure, ‘Living Lead Free,’ the American Water Works Association recommends having your water tested for lead to find out whether you should take action. Your local Kinetico water expert can have your water analyzed by a laboratory and help you decipher the results. Use a carbon drinking water filter or reverse osmosis system that has been certified to protect your drinking water from lead. Check that the manufacturer’s claims have been verified by the Water Quality Association or NSF International; not all systems are certified for lead reduction.
Leave A Comment